SmartGlove in the making

The Schematics of the Smart Glove I am developing to generate audio, visuals and lights via hand movements, fingers touching and fingers bending for Body Suit.


QR Code Bomber Jacket / The Maskerade Continues

The QR Code on the back of my jacket goes to my website.

People scan me while I walk down the street.

I made masks to have fun while taking public transportation while people stare at me… some laugh, others come up to me and start a conversations, others ignore… It’s fun, I feel like a superhero when wearing it.

To know more about its significance and / or to buy one, go to my website: WILLPOWER FLOW


Light Arms

Watch Video

After his first eTextile / Fashion Tech project Light Jacket , WILLPOWER was inspired to make his first Wearable !

Light Arms | A Strap-On Light for The Night 🌓

lulu’s were used as LED PCB’s for fiber optic cables.



Slideshow of LIGHT ARMS Lit Up


Process

Initial Sketches


All images and videos by WILLPOWER STUDIOS

Made @ WILLPOWER STUDIOS in Berlin, Germany


light-jacket-etextile-wearable-tech-by-WILLPOWER-STUDIOS

Light Jacket

Watch Video

As the left arm is bent, light animations are triggered.

I made this project as a student of the KOBA Wicked Winterschool where I learned about eTextiles ✂️ 🧥💡 🔋

A custom circuit board was made, conductive ⚡️ thread 🧵 and fabric 🧶 were used…

This is the first prototype.

~ Willpower LifeForce of WILLPOWER STUDIOS


Slideshow of Jacket Lit Up


Slideshow of Jacket Design


Process

Initial Sketches


Circuit Board Design including an ATtiny85 Microcontroller, the triangular board to be of Kapton material, Copper connections from the ATtiny85 to its pins, a resistor for the voltage divider, a connection to the lulu’s (eTextile addressable LEDs), a power source which ended up being 3V instead of 5V and the bend sensor.

Red = Power, Black = Ground, Other colors = Data



Programming the 2 LED lights to the ATtiny85 based on the bend sensor that will flow through the fiber optic cable carrying the light of the jacket.

Programming the ATtiny85 microcontroller to control the lulu LEDs based on the bend sensor‘s data.


The process of making the circuit board during the KOBA Wicked Winterschool was so much fun !

Circuit Board: ATtiny85 as microcontroller.

Vynil cutter to cut Kapton into triangular shape and copper tape for conductive thread.


Watch Videos In Playlist Below


The process of making the eTextile Bend Sensor using Conductive Thread, Conductive Fabric and Velostat.


Sketches and Notes


Finalizing the ATtiny85 Circuit Board


Sewing the jacket whose pattern was created by a very talented Fashion Designer. It involved the Copper Conductive Thread, the 3V coin cell battery holder, the circuit board, 2 lulus, 2mm of diameter fiber optic cable, the bend sensor and running final tests.


All images and videos by WILLPOWER STUDIOS

Made at KOBAKANT during the Wicked Winterschool and then @ WILLPOWER STUDIOS